Siemens SITRANS FC300 DN 4
Quantity
SITRANS FC300 is a compact coriolis mass flowmeter sensor suitable for flow measurement of all kinds of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down range and density accuracy. The single tube construction without internal welds, reductions or flow splitters offers optimal hygiene, safety and CIP cleanability for food & beverage and pharmaceutical applications.
Typical applications: Dosing in the chemical industry (dosing of chemicals), food & beverage industry (concentrates, ketchup, pastes) and pharmaceutical industry (preparations, dialysis liquids).
In order to make a complete flowmeter, the SITRANS FC300 flow sensor must be combined with one of the following MASS transmitters:
SITRANS FCT030: For general industry applications
SITRANS FCT010: For OEMs and skids in applications where space is limited
SITRANS FCT070: For SIMATIC ET 200SP distributed I/O
Benefits
- Flexible installation - Compact in-line sensor design of only 135x205x58 mm (5.12''x7.87''x23.6'') makes it easy to install everywhere
- Rugged & space saving - Sensor design in stainless steel matching all applications
- Optimal performance and stability – Also under changing process conditi-ns thanks to balanced pipe design with little mechanical energy-lossOptimum accuracy - For mass flow, density and % fraction enabled by 4-wire temperature measurement
- Plug & Play - Multiplug electrical connector and SENSORPROM facilitate cost efficient installation and commissioning
- Enhanced safety - Standard intrinsically safe EEx ia design
Detail
Measuring range
|
From 0 to 350 kg/h (0 to 772 lb/h)
|
---|---|
Nominal size
|
DN 4 / 1/6''
|
Accuracy
|
≤ 0.1 % of flow rate
|
Nominal pressure
|
Max. 410 bar (Max 5945 psi) |
Medium temperature
|
. -50 … 180 °C (-58 … 356 °F)
|
Sensor design
|
One tube bended
|
Enclosure
|
IP67/NEMA4
|
Approvals
|
EEx (ia) IIC T3-T6
ATEX and UL/CSA |