Siemens SITRANS FC MASS 2100 DI 3-15
Quantity
The SITRANS FC MASS 2100 DI 3-15 is suitable for accurate mass flow measurement for all kind of liquids and gases. The full bore design provides lower pressure loss due to the consistent internal diameter throughout the entire sensor and the single tube construction without internal welds, reductions or flow splitters offers optimal hygiene, safety and CIP cleanability.
Typical applications: Dosing in the chemical industry (dosing of chemicals), food & beverage industry (beer, juices, liquids such as chocolate, dressings) and automotive industry (Engine test rigs)
In order to make a complete flowmeter, the SITRANS F C MASS 2100 flow sensor must be combined with one of the following MASS transmitters:
SITRANS FCT030: For general industry applications
SITRANS FCT010: For OEMs and skids in applications where space is limited
SITRANS FCT070: For SIMATIC ET 200SP distributed I/O
Benefits
- Flexible installation - Centre-block design decouples process noise from the environment, i.e. vibrations, pulsations, pressure shocks etc. Rugged and space saving - sensor design in stainless steel matches all environments
- Highest integrity - Large dynamic turn down range better than 500:1 and the market's thickest tube wall
- Plug & Play - Multiplug electrical connector and SENSORPROM facilitate cost efficient installation and commissioning
- Optimum accuracy - for mass flow, density and % fraction thanks to 4-wire Pt1000 temperature measurement
- Safe and easy to service - Intrinsically safe Ia II C as standard, making service in hazardous areas possible without having to demount the sensor
Detail
Measuring range
|
0 to 5600 kg/h (0 to 12345 lb/h)
|
---|---|
Nominal size
|
DI 3 to DI 15 (1/8'' to 5/8'')
|
Accuracy
|
≤ 0.1 % of rate
|
Nominal pressure
|
Max 410 bar (Max 5946 psi)
|
Medium temperature
|
-50 … 180 °C (-58 … 356 °F )
|
Sensor design
|
One bended tube
|
Enclosure
|
IP65 (NEMA 4) |
Approvals
|
ATEX EEx (ia) IIC T3-T6
|