Siemens SITRANS FC MASS 2100 DI 1.5
Quantity
The SITRANS FC MASS 2100 DI 1.5 has demonstrated superior performance in numerous applications and field trials relating to mass flow- and density accuracy and turn down ratio. The single continuous tube design without internal welds, reductions or flow splitters, offers optimal hygiene, safety and CIP cleanability for food & beverage and pharmaceutical applications. This makes the SITRANS FC MASS 2100 DI 1.5 the preferred meter for research and development and mini-plant applications for liquid or gas measurement, where measuring very small quantities (e.g. drops per hour) is important.
Typical applications: Dosing in the chemical industry (dosing of chemicals), food & beverage industry (concentrates, ketchup, pastes) and pharmaceutical industry (preparations, dialysis liquids).
In order to make a complete flowmeter, the SITRANS FC MASS 2100 flow sensor must be combined with one of the following MASS transmitters:
SITRANS FCT030: For general industry applications
SITRANS FCT010: For OEMs and skids in applications where space is limited
SITRANS FCT070: For SIMATIC ET 200SP distributed I/O
Benefits
- Markets smallest and most stable zero point - Dual-drive pick-up and driver construction facilitate ultra low-weight pipe construction
- Optimal lifetime - Markets biggest wall thickness,corrosion resistent and high pressure durability
- Plug & Play - Multiplug electrical connector and SENSORPROM facilitate cost efficient installation and commissioning
- Enhanced safety - standard intrinsically safe EEx ia design
- Outstanding accuracy - 4-wire Pt1000 temperature measurement for reliability in mass flow, density and % fraction
Detail
Measuring range
|
From 0 to 30 kg/h (0 to 66 lb/h)
|
---|---|
Nominal size
|
DI 1.5 (1/16'')
|
Accuracy
|
≤ 0.1 % of rate
|
Nominal pressure
|
Liquid pressure max 365 bar / max 5294 psi (Hastelloy)
Liquid pressure max 230 bar / max 3330 psi (Stainless steel) |
Medium temperature
|
From -50 to 180 °C (-58 to 356 °F)
|
Sensor design
|
One tube bended
|
Enclosure
|
IP65 (NEMA 4)
|
Approvals
|
EEx (ia) IIC T3-T6
|