ALLEN-BRADLEY Dynamic Measurement Modules for ControlNet Networks
Quantity
Our Bulletin 1440 XM® Dynamic Measurement Modules for ControlNet™ networks monitor vibration, pressure, and strain on rotating equipment. These modules are designed to integrate with ControlLogix® controllers connected through a 1440 ControlNet™ adapter.
Overview
Overview
- Includes two channels that connect common vibration sensors (for example, eddy current probes and accelerometers) and any sensor that outputs a voltage signal
- Includes one tachometer channel that accepts input from most speed measurement sensors and can measure speeds 1…1.2M RPM with pulse rates 1…50,000 events per revolution
- Offers signal processing that provides synchronous or asynchronous measurements
- Offers signal processing that provides two levels of integration and FFT processing with as many as 30 measured parameters
- Includes one virtual relay
- Communicates via ControlNet™ network (connected through a 1440-ACNR ControlNet Adapter)
- Includes module configuration managed by a ControlLogix® controller and the Studio 5000™ Logix Designer application
- Module I/O and configuration tables are exposed as common tags in the Studio 5000 Logix Designer application
- Supports maximum of 10 1440-DYN02-01RJ Dynamic Measurement Modules on a ControlNet™ network
- Provides ability to monitor shaft, casing, or pedestal vibration in rotating equipment
Certifications
- ATEX
- C-Tick
- cUL
- cULH
- EMC
- LVD
- UL
- ULH
