- low-cost indicator with a large, 20 mm high display
- no analog input
- RS-485 / Modbus RTU
- MASTER / SLAVE
- brightness adjustable in 8 steps
- all parameters are freely programmable with remote controller or free configuration software S-Config
The SWE-94-S is a simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS-485 serial interface link. The displayed value may be collected from other device (in MASTER mode). The display brightness can be adjusted in 8 steps. Modbus RTU protocol is used for communication with the device. Baud rate is user defined in 1200 ÷ 115200 baud range. Over more communication interface RS-485 enables data transmission in any monitoring system equipped with Modbus RTU protocol. The meter can be ordered in 3 power supply versions. The meter can be configured with IR remote controller or free S-Config software via the RS-485 communication port.
| Input type |
no input
|
| Output type |
no output
|
| Power supply |
24V DC
110V AC
230V AC
|
| Display |
LED, 4 x 20 mm, red
|
| Communication Interface |
RS-485 / Modbus RTU
|
| Transmission parameters |
1200...115200 bit/s, 8N1 / 8N2
|
| Operating temperature |
0...+50°C
-20…+50°C
|
| Protection class |
IP 20 (case and connection clips)
IP 40 (front)
optional integrated frame for panel cut-out sealing
|
| Case material |
NORYL UL94 V0
|
| Mounting |
panel
|
| Case dimensions |
96 x 48 x 72 mm
|
