MAXWELL Programming Cable For Head Mount Temperature Transmitter(V1/V8)
Quantity
ˇń Programming cable for TT-200,TT-216
ˇń Two types of cable
ˇń V8 cable and V1 cable
ˇń V8 is bus powered
ˇń V1 need separate power for the transmitter
SPECIFICATIONS
ˇń Programming cable for TT-200,TT-216
ˇń Two types of cable
ˇń V8 cable and V1 cable
ˇń V8 is bus powered
ˇń V1 need separate power for the transmitter
ˇń V8 can draw power from computer
ˇń V1 can’t draw power, so separate power need for transmitter
ˇń CE comply
ORDERING CODE
V1: V1 cable is not bus powered cable, a separate 24VDC source has to be feeded to the transmitter when you programming the TT-200 or TT-216
V8: V8 cable is bus powered cable, if you are using V8 cable, the cable can draw power from your PC and then power the temperature transmitter,in this case, you don't need to wire the transmitter with 24VDC source
ˇń Two types of cable
ˇń V8 cable and V1 cable
ˇń V8 is bus powered
ˇń V1 need separate power for the transmitter
SPECIFICATIONS
ˇń Programming cable for TT-200,TT-216
ˇń Two types of cable
ˇń V8 cable and V1 cable
ˇń V8 is bus powered
ˇń V1 need separate power for the transmitter
ˇń V8 can draw power from computer
ˇń V1 can’t draw power, so separate power need for transmitter
ˇń CE comply
ORDERING CODE
V1: V1 cable is not bus powered cable, a separate 24VDC source has to be feeded to the transmitter when you programming the TT-200 or TT-216
V8: V8 cable is bus powered cable, if you are using V8 cable, the cable can draw power from your PC and then power the temperature transmitter,in this case, you don't need to wire the transmitter with 24VDC source