WINTERS D70 HEAVY DUTY 2-PIECE INDUSTRIAL DIAPHRAGM SEAL
WINTERS D70 HEAVY DUTY 2-PIECE INDUSTRIAL DIAPHRAGM SEAL DIAPHRAGM SEALS Winters Instruments Malaysia, Penang, Butterworth Supplier, Suppliers, Supply, Supplies | TECH IMPRO AUTOMATION SOLUTION SDN BHD
Quantity
APPLICATIONS:
  • Where the process fluid is corrosive or viscous and would clog instrument internals/solidify within the pressure gauge, switch or transmitter

DESCRIPTION & FEATURES:

  • Two piece construction and designed to withstand even the most severe process applications
  • “Continuous use” seals–backing plate will prevent diaphragm from rupturing if pressure sensing instrument fails. Pressure will be held until instrument is replaced
  • Diaphragm is separable for servicing and is available with a 1/8” NPT or 1/4” NPT flushing connection for removing any material which may clog the process connection
  • Standard diaphragm is constructed of AISI 316L stainless steel and welded to the upper chamber of the seal for pressures 30 psi (200 kPa) and above; optional Viton® diaphragm available for ranges from 30” Hg Vacuum (-100 kPa) up to 100 psi (690 kPa). Others diaphragms available
  • FKM is highly recommended for applications less than 10 psi
  • ASME B40.100 compliant
  • RoHS compliant
  • CRN registered (all 316 SS only)
  • 5 year warranty

SPECIFICATIONS

Housing 316L SS, Monel®, Hastelloy® C
Diaphragm 316L SS, Monel®, Hastelloy® C, FKM
Construction Two piece construction
Gasket Material Buna N (FKM, PTFE optional)
Connection

Bottom: 1/4”, 1/2”, 3/4” and 1” NPTF

Top: 1/4” and 1/2” NPTF

Process Temperature -22°F to 212°F (-30°C to 100°C)
Other

Flushing connection available.

Other materials such as PTFE, PVC, Carbon steel, acetal, Hastelloy® B, titanium, tantalum, etc. are available upon request


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version