TSURUGA MODEL 7592
D/A Transducer
D/A Transducer with Scaling Function
Model Designation
|
7592 |
- |
¡õ |
- |
¡õ |
- |
¡õ |
|
|
|
¢Ù |
|
¢Ú |
|
¢Û |
¢Ù Input Signal
|
Code |
Input Signal |
|
1 |
14 bit with polarity |
|
2 |
4 digits BCD with polarity |
¢Û Power Supply Voltage
|
Code |
Power Supply Voltage |
|
3 |
AC 100 V(90 to 132 V) |
|
5 |
AC 200 V(180 to 264 V) |
|
9 |
DC 24 V ± 10% |
¢Ú Output Signal
|
Code |
Output Signal |
|
01 |
DC 0 to 10 mV |
|
02 |
DC 0 to 100 mV |
|
03 |
DC 0 to 1 V |
|
04 |
DC 0 to 5 V |
|
05 |
DC 0 to 10 V |
|
09 |
DC 1 to 5 V |
|
00 |
Except above DC voltage output
(10 mV to 10 V) |
|
13 |
DC ±1 V |
|
14 |
DC ±5 V |
|
10 |
Except above DC ±voltage output
(±10 mV to ±10 V)
* During DC Power: Less than ±5 V |
|
23 |
DC 0 to 1 mA |
|
29 |
DC 4 to 20 mA |
|
20 |
Except above DC current output
(100 µA to 20 mA) |
Input Specifications
|
Input signal |
No voltage contact or open collector, TTL level
IIL ¨Q -1 mA, L = 0 - 1.0 V, H = 3.5 – 5 V |
|
Polarity input (POL) |
|
Polarity logic is positive |
: |
+ polarity¡¡ ¡¡ “H” level
- polarity ¡¡“L” level |
|
Polarity logic is negative |
: |
+ polarity¡¡¡¡ “L” level
- polarity ¡¡ “H” level |
|
|
Over range input (OVER) |
Polarity logic is positive (over): ¡¡“H” level
Polarity logic is negative (over): ¡¡“L” level |
|
Hold input (HOLD) |
The output is held by connecting pin with COM and making it “L” level. |
|
Synchronization signal (SYNC) |
Make an input of synchronized negative pulse when the width is more than 1ms. It captures the pulse raising data. |
Output Specifications
|
Output Signal |
Output Impedance |
Tolerable Load Resistance |
|
DC 0 to 10 mV |
Approx. 10 Ω |
More than 10 kΩ |
|
DC 0 to 100 mV |
Approx. 100 Ω |
More than 100 kΩ |
|
DC 0 to 1 V |
Less than 0.1 Ω |
More than 100 Ω |
|
DC 0 to 5 V |
More than 500 Ω |
|
DC 0 to 10 V |
More than 1 kΩ |
|
DC 1 to 5 V |
More than 500 Ω |
|
DC ±1 V |
|
DC ±5 V |
More than 2.5 kΩ |
|
DC 0 to 1 mA |
More than 5 MΩ |
0 to 15 kΩ (During DC power: 0 to 10 kΩ) |
|
DC 4 to 20 mA |
0 to 7500 Ω (During DC power: 0 to 500 Ω) |
General Specifications
|
Allowance |
±0.15% of SPAN at 23°C |
|
Resolution |
|
Input signal 1 |
: |
1/16384 |
|
2 |
: |
1/10000 |
|
3 |
: |
1/360 |
|
|
Response |
Approx. 20ms(0→90%)
Less than 0.2s (0→90%)in case of internal synchronization |
|
Temperature coefficient |
±150 ppm/°C |
|
Output adjustment range |
ZERO£ºMore than ± 3% of SPAN
SPAN£ºMore than ± 5% of SPAN |
|
Insulation resistance |
Between input terminals and output terminals: DC 500 V¡¡More than 100 MΩ |
|
Withstand voltage |
-
Between input terminals and power supply terminals
-
AC 1500 V 1min. (During DC power: AC 1000 V 1min.)
-
Between input terminals and output terminals
-
AC 1500V 1min. (During DC power: AC 1000 V 1min.)
Between all terminals and external case AC 1500 V 1min. |
|
Power supply voltage |
|
AC 90 to 132 V¡¡50/60 Hz |
: |
Less than 6 VA |
|
AC 180 to 264 V 50/60 Hz |
: |
Less than 6 VA |
|
DC 24 V ± 10% |
: |
Less than 100 mA |
|
|
Operating temperature |
-5 to 55°C |
|
Storage temperature |
-20 to 70°C |
|
Weight |
Approx. 370 g(AC) / Approx. 210 g(DC), Socket£º Approx. 70 g |
