TSURUGA MODEL 7544
Quantity
Tachogenerator Transducer
Model Designation
Model Designation
7544 | - | ¡õ | - | ¡õ |
¢Ù | ¢Ú |
Output Specifications
Output Signal | Output Impedance | Tolerable Load Resistance |
---|---|---|
DC 0 to 10 mV | Approx. 10 Ω | More than 10 kΩ |
DC 0 to 100 mV | Approx. 100 Ω | More than 100 kΩ |
DC 0 to 1 V | Less than 0.1 Ω | More than 100 Ω |
DC 0 to 5 V | More than 500 Ω | |
DC 0 to 10 V | More than 1 kΩ | |
DC 1 to 5 V | More than 500 Ω | |
DC ±1 V | ||
DC ±5 V | More than 2.5 kΩ | |
DC 0 to 1 mA | More than 5 MΩ |
0 to 12 kΩ (During DC power: 0 to 10 kΩ) |
DC 4 to 20 mA |
0 to 600 Ω (During DC power: 0 to 500 Ω) |
General Specifications
Input | AC voltage (sine wave) of Tachogenerator | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Input voltage | From AC 0-5 V to AC 0-250 V | |||||||||
Input frequency | 10 Hz to 1 kHz at 100% of input | |||||||||
Input impedance | 50 kΩ | |||||||||
Allowance | 0.3% of SPAN at 23°C | |||||||||
Response |
From 0-10 Hz to 0-20 Hz, Less than 5s (0→90%) From 0-20 Hz to 0-50 Hz, Less than 2s (0→90%) From 0-50 Hz to 0-1 kHz, Less than 0.5s (0→90%) |
|||||||||
Output ripple | Less than 1% p-p of SPAN | |||||||||
Temperature coefficient | 300 ppm/°C | |||||||||
Output adjustment range |
ZERO£ºMore than ± 3% of SPAN SPAN£ºMore than ± 20% of SPAN |
|||||||||
Insulation resistance | Between Input terminals and Output terminals: DC 500 V¡¡More than 100 MΩ | |||||||||
Withstand voltage | Between all terminals and external case:AC 1500 V¡¡1min. | |||||||||
Power supply voltage |
|
|||||||||
Operating temperature | -5 to 55°C | |||||||||
Storage temperature | -20 to 70°C | |||||||||
Weight |
Approx. 400 g(AC Power Supply) / Approx. 250 g(DC Power Supply) Socket£º Approx. 70 g |