TSURUGA MODEL 472B Panel Meter Digital/Printer Tsuruga Malaysia, Penang, Butterworth Supplier, Suppliers, Supply, Supplies

1 / 25

TSURUGA MODEL 472B

Quantity

WhatsApp me if you interested

TSURUGA

Reversible Counter (with Calculation Function)

■ High speed counter, suitable for 120 kHz.
■ Usage of 15.2 mm and 7.6 mm LCD with two colors – red and green.
■ Additional out with anlog and BCD output possible.
■ Display scaling is widely applicable in term of pulse coefficiency and pulse division ratio.
■ Available with 10 kHz.（472A）
Model Designation

472B	-	□	-	□	-	□	-	□	-	□
		①		②		③		④		⑤

①Power Supply

Code	Power Source Voltage
A	AC 100 to 240 V
9	DC 24 V
C	DC 110 V

②Sensor power

Code	Specifications
2	DC 5 V ± 5% 160 mA
3	DC 12 V ± 5% 100 mA

③Comparator output（AL3, AL4）

Code	Output
X	null
1	with Photo MOS Relay

④Analog Output

Code	Specifications
X	null
04	DC 0 to 5 V / More than 1 kΩ
05	DC 0 to 10 V / More than 1 kΩ
09	DC 1 to 5 V / More than 1 kΩ
29	DC 4 to 20 mA / Less than 510 Ω

⑤BCD output

Code	Specifications
X	null
DN	Open collector output (NPN)

General Specifications

Input signal		Line receiver 2 phases (A, B) Intended connection: Differential line driver (equivalent to AM26LS31). Duty ratio: 50% for both phases.
Counting system		Phase differential: Multiplication by 1, by 2, by 4, selectable by setting
Counting speed		120 kHz
Display range		-999999 to 999999
Pulse coefficient　(m)		1×10-6 to 9999
Pulse division ratio　(n)		1/1, 1/10, 1/100, 1/1000, 1/10000
Display value　(d)		(d)Display value ＝ (p)Number of pulse × (m)Pulse coefficient × (n)Pulse division ratio
Display Accuracy		±0 digit at pulse coefficient 1 and pulse division ratio 1
Display		Count display, red or green, character height 15.2 mm Over range in red, character height 7.6 mm With zero suppress function
Display Cycle		Approx. 100 ms
Decimal Point		0, 0.0, 0.00, 0.000
Key protection		Function which makes inable to change of setting contents.
Initialization function		Returns to factory shipment setting.
Control input	Pause / Latch	Pause – Counting is prohibited Latch – Counting is continued, display is held.
Control input	Reset	L level input or no voltage contact input
Sensor power		DC 5 V / 160 mA, DC 12 V / 100 mA
Comparator output	Option	AL3 and AL4 photo MOS relay, Contact capacity AC / DC 150 V 80 mA
Analog Output	Option	0 to 5 V, 0 to 10 V, 1 to 5 V, 4 to 20 mA
BCD output	Option	6 digits open collector output, Output capacity: DC 30 V, 10 mA with 2 m cable.
Compensation for blackout		The integrated value is memorized in non-volatile memory and retained. No count is made during the blackout. The data retaining duration is about 10 years.
Power Supply		AC 100 to 240 V, DC 24 V, DC 110 V
Power Consumption		AC 100 V … Approx. 12 VA AC 200 V … Approx. 17 VA DC 24 V … Approx. 270 mA DC 110 V … Approx. 60 mA
Operating Temperature		0 to 50°C
External Dimensions		96(W) × 48(H) × 133.3(D) mm
Weight		Approx. 300 g
Protection degree		Front panel operating section IP65, Rear case IP20, Terminal block section IP00
Mounting Method		Exclusive brackets

①Power Supply

②Sensor power

③Comparator output（AL3, AL4）

④Analog Output

⑤BCD output

General Specifications

Please leave your enquiry here, we will reply as soon as possible.