eYc Ozone Analyzer
Quantity
Note:This product only available in Taiwan, China and Hong Kong.
Applicable to measurement and analysis of environmental protection industries such as semiconductor, agriculture, water resources, etc.
UV-D photometric method determination of ozone concentration, traceable to NIST international standards
Measuring range£º
Standard type(User-range)£º1000 ppmv
Standard type(Auto-range)£º1 ... 100 ppm
Resolution£º
Standard type(User-range)£ºMin. 0.1 ppmv at 1000 ppm
Standard type(Auto-range)£ºMin. 0.1 ppbv at 1 ppm
Description
A single stable UV light source can reach the sampling photoelectric transmitter after passing through the highly transparent quartz glass window and the ozone reaction tank.
Through the ratio of the electrical signals(Light intensity) of the sample and the photoelectric sensor that filters ozone-free air, the data can be transmitted after analysis by the management software, we can calculat the ozone concentration.
Ozone generation and treatment technology has a wide range of applications in various industries.
It has the advantages of cleanliness, deodorization, decolorization, sterilization, no residue, and low cost, which is in line with the advantages of green industrial processes.
After the final reaction and half-life of ozone, it will be reduced to oxygen, so there will be no problem of toxic residue.
Specification
Application
Mainly used in ozone preparation workshop(Ozone generator / ozone plant building, etc.) / Chemicals / Petroleum / Paper / Textile / Pharmaceutical and essence perfume industry / Waterworks / Sewage / Ozone industry / Industrial process water treatment and ozone disinfection testing in pure water industry / Food and medicine sterilization workshops and other occasions
Applicable to measurement and analysis of environmental protection industries such as semiconductor, agriculture, water resources, etc.
UV-D photometric method determination of ozone concentration, traceable to NIST international standards
Measuring range£º
Standard type(User-range)£º1000 ppmv
Standard type(Auto-range)£º1 ... 100 ppm
Resolution£º
Standard type(User-range)£ºMin. 0.1 ppmv at 1000 ppm
Standard type(Auto-range)£ºMin. 0.1 ppbv at 1 ppm
Description
- UV-D photometric method determination of ozone concentration, traceable to NIST international standards
- Wide measuring range / Dynamic full-range measurement mode
- Quickly switch between measuring range and concentration unit(Six types)
- LCD, display of concentration, temperature and pressure
- Automatic temperature and pressure compensation / Built-in aspirator pump
A single stable UV light source can reach the sampling photoelectric transmitter after passing through the highly transparent quartz glass window and the ozone reaction tank.
Through the ratio of the electrical signals(Light intensity) of the sample and the photoelectric sensor that filters ozone-free air, the data can be transmitted after analysis by the management software, we can calculat the ozone concentration.
Ozone generation and treatment technology has a wide range of applications in various industries.
It has the advantages of cleanliness, deodorization, decolorization, sterilization, no residue, and low cost, which is in line with the advantages of green industrial processes.
After the final reaction and half-life of ozone, it will be reduced to oxygen, so there will be no problem of toxic residue.
Specification
Type | Standard type(User-range) | Standard type(Auto-range) |
Measuring range | 1000 ppmv / 1% / 20%v/v / Auto-range | 1 ... 100 ppm / User-range |
Analog output | Analog output(Optional) | Analog output(Optional) |
4 ... 20 mA / DC 0 ... 1 V / DC 1 ... 5 V (Choose one) |
4 ... 20 mA / DC 0 ... 1 V / DC 1 ... 5 V (Single selection) |
|
Display unit |
ppm¡¢%¡¢mg/m3¡¢g/m3 at Auto-range |
ppb¡¢ppm¡¢mg/m3¡¢μg/m3 at Auto-range |
Heat engine time | ≤5 min | ≤5 min |
Resolution | Min. 0.1 ppmv at 1000 ppm | Min. 0.1 ppbv at 1 ppm |
Reaction time(T95) | £¼10 sec | 40 sec at 500 ppb |
Data update speed | 0.1 sec ... 100 min | 0.1 sec ... 100 min |
Data average time | 0.1 sec ... 25500 min | 0.1 sec ... 25500 min |
Data storage |
4000 rows of data record
(Max. storage capacity 270 days,
hardware output) |
4000 rows of data record
(Max. storage capacity 270 days,
hardware output) |
Zero drift | Automatic compensation | Automatic compensation |
Accuracy (Instrument error) |
±2%F.S.(Full scale) |
Reading±1% at 100 ppb ... 100 ppmv Provide ISO17025 report traceable to NIST SRP#30 |
Sample update speed | 1 sec ... 24 hr | 1 sec ... 24 hr |
Detecting unit |
254 nm, reduced to 50% after about 20,000 hours of life |
254 nm, reduced to 50% after about 20,000 hours of life |
Sampling & Calibration flow |
1.0 L/min(not included pump) | 1.0 ... 1.5 L/min(Built-in pump) |
Exterior dimension | L250xW200xH62 mm | L250xW200xH62 mm |
Weight | 1.5 kg(Include active carbon) | 1.5 kg(Include purification device) |
Power supply |
DC 12 V, 1.5A max. at AC 100 ... 240 V, 50 / 60 Hz |
DC 12 V, 1.5A max. at AC 100 ... 240 V, 50/60 Hz |
Operating Temp. range | 0 ... 40°C | 0 ... 40°C |
Operating pressure range | 700 ... 780 mmHg | 700 ... 780 mmHg |
Digit signal output | USB(Temp. / Pressure / Concentration) | USB(Temp. / Pressure / Concentration) |
Warning signal output |
LED(Filter clogging/ Light source / Active carbon / Calibration reminder) |
LED(Filter clogging / UV light source / Ozone purifier / Calibration) |
Standard
accessories
|
User manual | User manual |
Silicone tube(0.5 m) | Silicone tube(0.5 m) | |
B-type USB cable(1 m) | B-type USB cable(1 m) | |
USB to RS-485 one communication line (User self-calibration) |
None | |
DC 12 V 1.5 A max. 1 voltage transformer |
DC 12 V 1.5 A max. 1 voltage transformer |
|
Verification retrospective report | Calibration retrospective report | |
Software CD for user self-calibration | None | |
Optional
accessories
|
Software CD for user self-calibration and concentration conversion(Advanced version) |
Select two correction range (Calibration fee is extra) |
Float ozone resistant flow controller(0 ... 2 LPM) |
Float ozone resistant flow controller(0 ... 2 LPM) |
|
None |
Software CD£ºRead, self-calibration, switching and other functions |
|
Pump DC 110 / 220 V 60 Hz | Pump DC 110 / 220 V 60 Hz | |
None |
USB to RS-485 communication cable£º Self-calibration, switching and other functions |
Application
Mainly used in ozone preparation workshop(Ozone generator / ozone plant building, etc.) / Chemicals / Petroleum / Paper / Textile / Pharmaceutical and essence perfume industry / Waterworks / Sewage / Ozone industry / Industrial process water treatment and ozone disinfection testing in pure water industry / Food and medicine sterilization workshops and other occasions