eYc FTM06T Air / Water Thermal Mass Type Air Velocity and Flow Transmitter
eYc FTM06T Air / Water Thermal Mass Type Air Velocity and Flow Transmitter Air Flow Transmitter Flow / Air Velocity / Air Volume eYc Malaysia, Penang, Butterworth Supplier, Suppliers, Supply, Supplies | TECH IMPRO AUTOMATION SOLUTION SDN BHD
Quantity
Output signal: analog / RS-485 / Impulse output
Input signal type: Thermal mass flow sensor
Measuring range: Air : 0 ... 20 m/s ; 0 ... 40 m/s£»Water : 0 ... 1.5 m/s ; 0 ... 3 m/s
Accuracy: Air: ±3% 0 ... 20 m/s, ±5% 0 ... 40 m/s
Water :±3% 0 ... 1.5 m/s, ±5% 1.5 ... 3 m/s
IP65 (IP67 optional)
¡ñYUDEN-TECH CO.,LTD. Calibration Laboratory - ( ILAC / TAF ) Test report, for more detailed information please contact us.
(TAF accreditation£º3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA

Description

Exhaust gas / Water treatment
Best solution of air velocity and flow monitoring

Operation buttons to set the diameter range; for measuring flow and velocity
Analog / RS-485 / Impulse output, multiple output options
Capable of temperature compensation, accurate measurement
Using constant temperature anemometer(CTA) technology, good sensitivity
Turndown ratio 50£º1 , excellent repeatability at low velocity
IP65 IP rating (IP67 optional), stainless steel casing, suitable for various severe environments, such as slightly corrosive liquids
FTM06T Air / Water thermal mass type air velocity and Flow transmitter, contains three sensing elements (Rh / Rt / PT), the heater (Rh) is used for measurement, temperature compensation sensor (Rt), the temperature sensor (PT) that detects the air flow is used as a reference to measure the temperature of the medium.
Rh is the heating body, Rt is used to sense the temperature change of the water flow; as the water velocity increases, when the fluid passes through Rh, it will take away more heat; PT will sense the current temperature of the water at any time.
The temperature difference between the two sensors of Rh and PT is used as the basis for measuring the flow rate, when the medium flow rate increases, the temperature difference value is decreased, and conversely increase, the temperature difference value is processed and converted into standard signal output and displayed, through the unique linear regression technology, a good flow rate performance is obtained.

Specification
Input
Signal type : Thermal mass flow sensor
Range : Air : 0 ... 20 m/s ; 0 ... 40 m/s
             Water : 0 ... 1.5 m/s ; 0 ... 3 m/s
Turndown ratio : 50 : 1
Installation angle influence : £¼5% of the measured value
Output
Signal : 4 ... 20 mA+RS-485, 0 ... 10 V+RS-485, Impulse+RS-485
Default output : Out1 : Velocity
Signal connection method : 3-wire
Accuracy : Air: ±3% 0 ... 20 m/s, ±5% 0 ... 40 m/s
                 Water :±3% 0 ... 1.5 m/s, ±5% 1.5 ... 3 m/s
Temp. influence : 1°C¨Q0.1%
Warm-up time : £¼60 sec
Reaction time : ¨Q30 sec
Load impedance : Voltage output£º¨R 10 KΩ
                             Current output£º¨Q 250 Ω
Electrical
Power supply : DC 24 V±10%
Current consumption : £¼0.2 A
Electrical connections : M12 Metal connector

Environmental
Medium : Air, Water, 
Operating Temp. ( Including body ) : 0 ... 50°C
Operating Humid. ( Including body ) : 20 ... 90%RH(Non-condensing)
Probe Operating Temp. : 0 ... +80°C
Storage Temp. : -20 ... +85°C
Storage Humid. : 0 ... 95%(Non-condensing)
Probe pressure : 16 bar

Installation
Flange : Metal flange mount
Thread : R1/2'' metal connector
Flange pipe : Flange pipe

Protection
IP rating : IP65 (IP67 optional)
Electrical protection : ¡ö Polarity protection ¡ö Over-voltage ¡ö Short-circuit

Material
Cover : Cover : PC (Display ), SUS 304 ( No display )
Body (including probe and probe head) : SUS304 stainless steel
Weight : 475 g

Application
Gas application£º
Semiconductor / Electronics industry / Biotechnology industry / Food / Pharmacy / Papermaking
Liquid application£º
Water treatment / Monitoring of water flow / Water resources monitoring / Water cooling cycle

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version